| Tube Fittings Double Ferrule |
 |
|
|
| Port Connector |
|
| Spare Components |
|
| Special Fitting |
|
| Tube Ends |
|
| Tube To An Flare 37 Degree |
|
| Tube To Female Pipe Thread |
|
| Tube To Male Pipe Thread |
|
|
| - 45 Degree Male Elbow |
| - 45 Degree Positional Male Elbow |
| - Bulk Head Male Connector |
| - Long Male Connector |
| - Male Branch Tee |
| - Male Connector |
| - Male Elbow |
| - Male Run Tee |
| - Positionable Male Branch Tee |
| - Positionable Male Run Tee |
| - Positional Male Elbow |
|
|
|
| Tube To Tube |
|
| Weld Fitting |
| |
|
|
| Positional Male Elbow |
| |
| Frac Tube X sae-ms Straight |
| |
 |
| |
| Tubefit part no. |
Equivalent Part no. Type 1 |
Equivalent part no Type 2 |
LX |
ODT-ØT(INCHES) |
Ø E |
BODY HEX F |
C |
SAE/MS MALE PIPE SIZE P |
L |
NUT HEX W |
D |
| 4-PMED-7SM |
-400-2-4ST |
4M5SEL4 |
1.12 |
1/4 |
0.19 |
9/16 |
0.70 |
7/16-20 |
1.12 |
9/16 |
0.60 |
| 4-PMED-9SM |
-400-2-6ST |
---------- |
1.27 |
1/4 |
0.19 |
5/8 |
0.70 |
9/16-18 |
1.20 |
9/16 |
0.60 |
| 5-PMED-8SM |
-500-2-5ST |
---------- |
1.16 |
5/16 |
0.23 |
9/16 |
0.73 |
1/2-20 |
1.19 |
5/8 |
0.64 |
| 6-PMED-9SM |
-600-2-6ST |
6M5SEL6 |
1.27 |
3/8 |
0.28 |
13/16 |
0.76 |
9/16-18 |
1.26 |
11/16 |
0.66 |
| 6-PMED-12SM |
-600-2-8ST |
---------- |
1.49 |
3/8 |
0.28 |
13/16 |
0.76 |
3/4-16 |
1.37 |
11/16 |
0.66 |
| 8-PMED-12SM |
-810-2-8ST |
8M5SEL8 |
1.49 |
1/2 |
0.41 |
13/16 |
0.86 |
3/4-16 |
1.48 |
7/8 |
0.90 |
| 10-PMED-14SM |
-1010-2-10ST |
---------- |
1.71 |
5/8 |
0.50 |
15/16 |
0.86 |
7/8-14 |
1.56 |
1 |
0.96 |
| 12-PMED-17SM |
-1210-2-12ST |
12M5SEL12 |
1.92 |
3/4 |
0.62 |
1-1/16 |
0.86 |
1-1/16-12 |
1.63 |
1-1/8 |
0.96 |
| 14-PMED-19SM |
-1410-2-14ST |
---------- |
1.99 |
7/8 |
0.72 |
1-3/16 |
0.86 |
1-3/16-12 |
1.70 |
1-1/4 |
1.02 |
| 16-PMED-21SM |
-1610-2-16ST |
16M5SEL16 |
2.11 |
1 |
0.88 |
1-3/8 |
1.04 |
1-5/16-12 |
1.99 |
1-1/2 |
1.23 |
|
| |
| Note : |
 |
The E dimension is the minimum opening & fitting of this group may be back drilling to larger id at pipe thread or straight thread end. |
| |
Dimension l1,c,d in shown in the finger-tight position. |
|
Dimensions are for reference only and subject to change. |
|
Sae/ms (unf) thread as per asmeb1.1. |
| |
All part numbers are proprietary of their respective owners |
|
|
