| Tube Fittings Double Ferrule |
 |
|
|
| Port Connector |
|
|
| - Bulk Head Reducer |
| - Female Adapter |
| - Long Reducer |
| - Male Adapter |
| - Port Connector |
| - Reducer |
| - Reducer Port Connector |
| - Weld Adapter |
|
|
|
| Spare Components |
|
| Special Fitting |
|
| Tube Ends |
|
| Tube To An Flare 37 Degree |
|
| Tube To Female Pipe Thread |
|
| Tube To Male Pipe Thread |
|
| Tube To Tube |
|
| Weld Fitting |
| |
|
|
| Female Adapter |
| |
| Metric Stub Xiso Para (F) Gauge |
| |
 |
| |
| Tubefit part no. |
Equivalent Part no. Type 1 |
Equivalent part no Type 2 |
ODT-ØT(INCHES) |
Ø E |
BODY HEX F |
ISOP-FEMALE-PIPE-SIZE P |
L |
| 6M-FAD-4IPG |
-6-MTA-7-4RG |
---------- |
6 |
4.6 |
19 |
1/4 |
35.3 |
| 6M-FAD-6IPG |
-6-MTA-7-6RG |
---------- |
6 |
4.6 |
25 |
3/8 |
38.4 |
| 6M-FAD-8IPG |
-6-MTA-7-8RG |
---------- |
6 |
4.6 |
27 |
1/2 |
42.9 |
| 8M-FAD-4IPG |
-8-MTA-7-4RG |
---------- |
8 |
5.5 |
19 |
1/4 |
33.0 |
| 8M-FAD-8IPG |
-8-MTA-7-8RG |
---------- |
8 |
6.2 |
27 |
1/2 |
43.7 |
| 10M-FAD-4IPG |
-10-MTA-7-4RG |
---------- |
10 |
5.5 |
19 |
1/4 |
34.5 |
| 10M-FAD-8IPG |
-10-MTA-7-8RG |
---------- |
10 |
7.0 |
27 |
1/2 |
40.1 |
| 12M-FAD-4IPG |
-12-MTA-7-4RG |
---------- |
12 |
5.5 |
19 |
1/4 |
40.1 |
| 12M-FAD-8IPG |
-12-MTA-7-8RG |
---------- |
12 |
7.0 |
27 |
1/2 |
48.8 |
| 16M-FAD-8IPG |
-16-MTA-7-8RG |
---------- |
16 |
7.0 |
27 |
1/2 |
49.0 |
| 18M-FAD-8IPG |
-18-MTA-7-8RG |
---------- |
18 |
7.0 |
27 |
1/2 |
49.3 |
|
| |
| Note : |
| No seal in made around the male pipe thread, instead, a gasket is dropped into the flat bottom in the female thread, and the end of the male threaded end exerts a load on the gasket to seal.(use rggd fitting gasket) |
|
 |
The dimension is the minimum opening & fitting of this group may be back drilling to larger id at pipe thread or straight thread end. |
|
Dimensions are for reference only and subject to change. |
|
Npt thread as per ansi b 1.20.1. |
| |
All part numbers are proprietary of their respective owners |
|
|
